PIER TECH SYSTEMS IS THE MANUFACTURER OF CHOICE FOR ENGINEERS THROUGHOUT THE WORLD!
HELICAL PIERS, ALSO KNOWN AS ANCHORS, PILES, AND SCREW PILES, ARE DEEP FOUNDATIONS SOLUTIONS USED TO SECURE NEW OR REPAIR EXISTING FOUNDATIONS.
MOST COMMONLY USED WHENEVER SOIL CONDITIONS PREVENT STANDARD FOUNDATION SOLUTIONS. THE DESIGN IS EASY TO INSTALL, INSTEAD OF REQUIRING LARGE EXCAVATION WORK, THEY THREAD RIGHT INTO THE GROUND. MINIMIZING INSTALLATION TIME AND REQUIRES LITTLE SOIL DISTURBANCE. MOST IMPORTANTLY, HELICAL PILES ALLOW THE TRANSFER OF THE WEIGHT OF THE STRUCTURE TO LOAD BEARING SOIL.
THE BEST IN THE INDUSTRY
-
MADE FROM THE HIGHEST QUALITY STEEL
-
HIGHER TORQUE CAPACITY THAN THE COMPETITION
-
SUPERIOR LATERAL STRENGTH AND STABILITY
-
GALVANIZED OR BARE STEEL OPTIONS
-
SQUARE OR ROUND SHAFTS
ROUND SHAFT ADVANTAGES
-
SUPERIOR LATERAL STABILITY
-
GREATER SECTION MODULUS STRENGTH TO RESIST TWISTING AND DEFLECTION
-
PATENTED CROSS- BOLT CONNECTION
-
GREATER LOAD CAPACITITES
-
EASY TO INSTALL
-
INSTALLS IN ANY SEASON
-
MINIMAL SOIL DISTURBANCES
-
NOT EFFECTED BY HIGH WATER TABLE
SQUARE SHAFT ADVANTAGES
-
GREATER YIELD AND TENSILE STRENGTH
-
PATENTED CROSS- BOLT CONNECTION
-
INCREASED SAFETY FACTOR
-
HIGHER TORQUE CAPASITY
-
EASY TO INSTALL
-
INSTALLS IN ANY SEASON
-
MINIMAL SOIL DISURBANCES
-
NOT AFFECTED BY HIGH WATER TABLE
PIER TECH SYSTEMS IS A LEADING MANUFACTURER OF HELICAL PILES, PIERS, CONNECTION ACCESSORIES, AND FOUNDATION REPAIR EQUIPMENT. EXPERIENCE AND FAMILIARITY WITH INSTALLATIONS, ALLOW US TO GIVE EXACT RECOMMENDATIONS FOR YOUR PROJECT. PIERTECH KNOWS EVERY PART OF THE SYSTEM FROM THE SMALLEST ACCESSORIES TO THE LARGEST PIER.
OUR PATENTED PRODUCTS ARE MANUFACTURED TO THE HIGHEST STANDARDS, GIVING YOU THE SUPPORT, YOU NEED.
CONFIDENCE IN OUR PRODUCTS SHOWS BY OFFERING THE LONGEST WARRANTY IN THE INDUSTRY. BEING ONE OF THE FEW COMPANIES THAT STOCK INVENTORY, PIERTECH HAS THE EQUIPMENT, PILES, AND ANCHORS YOU NEED TO GET YOUR PROJECT STARTED IMMEDIATELY.
CROSS LOCK CONNECTION
THE PATENTED CROSS LOCK CONNECTION WAS AWARDED ESR-3969 FROM ICC-ES FOR THE HELICAL PILE SYSTEM. THE CONNECTION INSTANTLY ALIGNS AND LOCKS IN PLACE, ELIMINATING THE ISSUE OF LINING UP BOLT HOLES OR WASTING TIME THREADING A BOLT THROUGH A DEFORMED HOLE. THE CROSS-LOCK ALLOWS INSTALLERS TO SIMPLY CONNECT AND QUICKLY CONTINUE THE INSTALLATION PROCESS.
CROSS LOCK ADVANTAGES
-
INSTANT ALLIGNMENT
-
COMPLETE STEEL ON STEEL CONNECTION
-
TORQUE IS FULLY CONTAINED IN THE COUPLING
-
ZERO BOLT HOLE ELONGATION DURING INSTALLATION
-
ICC-ER CERTIFIED
-
SUPERIOR STRENGTH AND LATERAL STABILITY
-
REDUCE INSTALLATION TIMES UP TO 50%
TRU-LIFT BRACKET
UNLIKE MOST FOUNDATION REPAIR BRACKETS, PIERTECH’S PATENTED TRU-LIFT BRACKET IS LIGHTWEIGHT, EASY TO INSTALL, AND IS MOVEMENT FREE. THIS SAVES YOU TIME AND MONEY ESPECIALLY ON LARGER PROJECTS. IT IS PATENTED TO DRAW INTO THE FOUNDATION, PROVIDING A SECURE AND STABLE PLATFORM THAT WILL NOT MOVE OR ROTATE. THE TRU-LIFT BRACKET IS MADE FROM THE HIGHEST QUALITY STEEL, AND IS DESIGNED TO LAST FOR YEARS EVEN UNDER THE MOST STRENUOUS WORKING CONDITIONS.
PUSH PIERS
HYDRAULICALLY DRIVEN SECTIONS OF PIPE THAT CAN BE DRIVEN THROUGH UNSTABLE SOIL INTO LOAD-BEARING STRATA. AVAILABLE IN 2 7/8″ AND 3 1/2″ SHAFT DIAMETERS, AND ARE EITHER 18″ OR 36″ LONG. PUSH PIERS CAN BE GALVANIZED OR BARE STEEL DEPENDING UPON YOUR REQUIREMENTS. THE SYSTEM IS RECOMMENDED WHEN BEDROCK OR LOAD-BEARING STRATA IS CLOSE TO THE TOP SOIL. IF YOU MUST PENETRATE LAYERS OF SOIL BEFORE LOADING BEARING SOIL CAN BE REACHED, WE RECOMMEND USING HELICAL PIERS. PUSH PIERS CAN BE INSTALLED WITH LIGHTWEIGHT PORTABLE EQUIPMENT WHEN CLEARANCE ISSUES PREVENT HEAVY DUTY EQUIPMENT FROM BEING USED.
